Wind turbine control cabinet XS-FDPD-B

Product Description

　　XINGSHENG Electrical wind turbine control cabinets are divided into nacelle switchgear and base switchgear. Inside the cabinet, various electrical equipment in the nacelle and base are supplied through circuit breakers and other control devices. Switchgear wiring notes: PE terminals should be reliably grounded; wire size and wire color should be strictly selected according to the schematic diagram; Operation preparation: All circuit breakers are in the off position; The incoming power cable is reliably connected and there is no looseness, ensuring that the 690V 400V power supply is connected to the corresponding system; The surge arrester is correctly installed; Grounding is reliable; Commissioning: Ensure that the incoming voltage is stable and reliable; According to the needs of the controlled equipment, turn on the circuit breakers of the circuits that need to be energized;

Technical Advantages

　　Precautions:

　　1. Operating precautions: After the leakage circuit breaker trips due to leakage current, reset the leakage module before closing the circuit breaker again;

　　2. Maintenance precautions: During shutdown and storage, the equipment should be protected from moisture;

　　3. Daily inspection at least once a month, the main contents include;

　　4. Wiring terminals, cables, and busbars should show no signs of overheating;

　　5. The cabinet protection is intact and there is no leakage;

　　6. The grounding of all parts should be intact;

　　7. All signs should be complete and clear;

　　8. Whether the surge protector in the cabinet has failed.